Why is my air conditioner not turning on?

Check whether the system has power. Confirm that the wall isolator is switched on, the controller or remote has working batteries, and the relevant circuit breaker or safety switch has not turned off. If the controller is blank or the indoor unit does not respond, do not open electrical covers. If the circuit breaker or safety switch turns off again after being reset, leave the system off and contact a licensed electrician or air conditioning technician.

Why is my air conditioner running but not cooling?

Check that the system is set to COOL mode and that the selected temperature is lower than the room temperature. Close external doors and windows, clean accessible filters, check indoor airflow, and ensure the outdoor unit is not obstructed. If the unit runs continuously without reducing the room temperature or cooling performance has suddenly declined, arrange professional testing.

Why is my reverse cycle air conditioner not heating?

Confirm that the system is set to HEAT mode and select a temperature above the current room temperature. Reverse cycle systems may briefly delay the indoor fan while the coil warms and may pause during normal defrost cycles. Check filters and outdoor airflow. Arrange a service if the system continues blowing cool air or cannot reach the selected temperature.

Why does my air conditioner temporarily stop heating in winter?

The system may be completing a normal defrost cycle. During defrosting, indoor and outdoor fans may stop while frost is removed from the outdoor heat exchanger. Heating should resume automatically. Arrange a service if defrosting becomes unusually frequent, lasts much longer than normal, or heating performance remains poor.

Why is the airflow from my split system or ducted vents weak?

Weak airflow can be caused by dirty filters, low fan speed, blocked supply vents, an obstructed return-air grille or incorrect ducted zone settings. Clean only accessible user-serviceable filters. If airflow remains weak, the indoor coil, fan, zone damper or ductwork may require professional inspection.

Why is one room not heating or cooling properly with ducted air conditioning?

Check that the room or zone is enabled on the controller and that its supply-air grille is open and unobstructed. Check the return-air filter and system settings. If one room remains noticeably different from the rest of the property, the cause may involve zone controls, a damper, damaged ductwork, air leakage or airflow balancing and should be professionally inspected.

Why is one indoor unit in my multi-head system flashing and not operating?

Check that all indoor units connected to the same outdoor unit are set to the same operating mode. Multi-head systems generally cannot heat one room while cooling another. If all indoor units are already set to the same mode and one continues flashing, record the flashing-light pattern and arrange a service.

Why does my air conditioner keep turning on and off?

Some cycling is normal with inverter air conditioners. Frequent short cycling may be caused by dirty filters, restricted airflow, timer settings, controller or sensor issues, incorrect system sizing, or electrical or refrigeration faults. Arrange a service if the system starts and stops every few minutes or cannot maintain comfort.

Why is water leaking or dripping from the indoor unit?

Turn the system off if water is dripping from the indoor unit, ductwork or ceiling. Possible causes include a blocked or damaged drain, failed condensate pump, restricted airflow, a frozen coil or another internal fault. Do not dismantle the unit or use chemicals in internal drains. Arrange professional inspection.

Is water or frost around the outdoor unit normal?

Some water beneath the outdoor unit and light frost can be normal during heating and defrost operation. Heavy ice that remains, water entering the building, hazardous drainage or leaks from unusual locations should be investigated. Do not chip ice from the coil or pour hot water over the outdoor unit.

Why is my air conditioner making an unusual noise?

Brief clicks and normal airflow sounds can occur during operation. New, loud or persistent rattling, grinding, scraping, squealing, buzzing or strong vibration may indicate a fan, motor, bearing, electrical or compressor-related fault. Turn the system off if the noise is severe or accompanied by a burning smell, poor performance or water leakage.

Why does my air conditioner smell musty, stale or like it is burning?

Musty or stale smells may be caused by dust, moisture or microbial growth on filters, coils, fans or drainage components. Clean accessible filters according to manufacturer instructions. A persistent burning, melting-plastic or electrical smell may indicate overheating or an electrical fault, so switch the system off and arrange professional inspection.

Why is my air conditioner remote control not working?

Replace the batteries, confirm they are installed correctly, point the remote at the indoor unit and check for obstructions. Check whether a timer, lock or controller setting is active and confirm the operating mode. Refer to the model-specific manual if the unit still does not respond.

What should I do when an operation light is flashing or an error code appears?

Record the full error code, controller message or flashing-light pattern before switching the system off. Note which units are affected and whether the problem occurs in heating, cooling or both. Do not repeatedly reset an unresolved fault. Provide the exact error code and model number when booking a service.

Why has Mitsubishi Electric Wi-Fi Control stopped working?

Check that the internet connection and router are working, the air conditioner has power and the Wi-Fi Control app is logged in. Re-pairing may be required after a router replacement, network name change, password change or network reset. Use the Mitsubishi Electric instructions for the specific adaptor.

Why has my air conditioning electricity use increased?

Higher electricity use may result from longer operating hours, extreme weather, very high or low temperature settings, dirty filters, blocked airflow, open doors and windows, poor insulation or conditioning more rooms. Arrange a maintenance check if electricity use rises significantly without a corresponding change in weather or usage and performance has also declined.

How often should I clean the filters and have the system serviced?

Follow the maintenance schedule in the manufacturer manual. For many wall-mounted Mitsubishi Electric systems, filters should be checked and cleaned approximately every two weeks during heavy use. A yearly professional service is a practical starting point for many residential systems, while commercial or heavily used systems may need more frequent servicing.

When should I stop troubleshooting and call a technician?

Stop using the system and arrange professional assistance for repeated circuit-breaker or safety-switch trips, smoke, sparks, persistent burning smells, electric shock or tingling, water near electrical parts, major indoor leakage, loud grinding noises, heavy ice that does not clear, recurring error codes or complete loss of heating or cooling after basic checks.

Why is my air conditioner not turning on?

Check whether the system has power. Confirm that the wall isolator is switched on, the controller or remote has working batteries, and the relevant circuit breaker or safety switch has not turned off. If the controller is blank or the indoor unit does not respond, do not open electrical covers. If the circuit breaker or safety switch turns off again after being reset, leave the system off and contact a licensed electrician or air conditioning technician.

Why is my air conditioner running but not cooling?

Check that the system is set to COOL mode and that the selected temperature is lower than the room temperature. Close external doors and windows, clean accessible filters, check indoor airflow, and ensure the outdoor unit is not obstructed. If the unit runs continuously without reducing the room temperature or cooling performance has suddenly declined, arrange professional testing.

Why is my reverse cycle air conditioner not heating?

Confirm that the system is set to HEAT mode and select a temperature above the current room temperature. Reverse cycle systems may briefly delay the indoor fan while the coil warms and may pause during normal defrost cycles. Check filters and outdoor airflow. Arrange a service if the system continues blowing cool air or cannot reach the selected temperature.

Why does my air conditioner temporarily stop heating in winter?

The system may be completing a normal defrost cycle. During defrosting, indoor and outdoor fans may stop while frost is removed from the outdoor heat exchanger. Heating should resume automatically. Arrange a service if defrosting becomes unusually frequent, lasts much longer than normal, or heating performance remains poor.

Why is the airflow from my split system or ducted vents weak?

Weak airflow can be caused by dirty filters, low fan speed, blocked supply vents, an obstructed return-air grille or incorrect ducted zone settings. Clean only accessible user-serviceable filters. If airflow remains weak, the indoor coil, fan, zone damper or ductwork may require professional inspection.

Why is one room not heating or cooling properly with ducted air conditioning?

Check that the room or zone is enabled on the controller and that its supply-air grille is open and unobstructed. Check the return-air filter and system settings. If one room remains noticeably different from the rest of the property, the cause may involve zone controls, a damper, damaged ductwork, air leakage or airflow balancing and should be professionally inspected.

Why is one indoor unit in my multi-head system flashing and not operating?

Check that all indoor units connected to the same outdoor unit are set to the same operating mode. Multi-head systems generally cannot heat one room while cooling another. If all indoor units are already set to the same mode and one continues flashing, record the flashing-light pattern and arrange a service.

Why does my air conditioner keep turning on and off?

Some cycling is normal with inverter air conditioners. Frequent short cycling may be caused by dirty filters, restricted airflow, timer settings, controller or sensor issues, incorrect system sizing, or electrical or refrigeration faults. Arrange a service if the system starts and stops every few minutes or cannot maintain comfort.

Why is water leaking or dripping from the indoor unit?

Turn the system off if water is dripping from the indoor unit, ductwork or ceiling. Possible causes include a blocked or damaged drain, failed condensate pump, restricted airflow, a frozen coil or another internal fault. Do not dismantle the unit or use chemicals in internal drains. Arrange professional inspection.

Is water or frost around the outdoor unit normal?

Some water beneath the outdoor unit and light frost can be normal during heating and defrost operation. Heavy ice that remains, water entering the building, hazardous drainage or leaks from unusual locations should be investigated. Do not chip ice from the coil or pour hot water over the outdoor unit.

Why is my air conditioner making an unusual noise?

Brief clicks and normal airflow sounds can occur during operation. New, loud or persistent rattling, grinding, scraping, squealing, buzzing or strong vibration may indicate a fan, motor, bearing, electrical or compressor-related fault. Turn the system off if the noise is severe or accompanied by a burning smell, poor performance or water leakage.

Why does my air conditioner smell musty, stale or like it is burning?

Musty or stale smells may be caused by dust, moisture or microbial growth on filters, coils, fans or drainage components. Clean accessible filters according to manufacturer instructions. A persistent burning, melting-plastic or electrical smell may indicate overheating or an electrical fault, so switch the system off and arrange professional inspection.

Why is my air conditioner remote control not working?

Replace the batteries, confirm they are installed correctly, point the remote at the indoor unit and check for obstructions. Check whether a timer, lock or controller setting is active and confirm the operating mode. Refer to the model-specific manual if the unit still does not respond.

What should I do when an operation light is flashing or an error code appears?

Record the full error code, controller message or flashing-light pattern before switching the system off. Note which units are affected and whether the problem occurs in heating, cooling or both. Do not repeatedly reset an unresolved fault. Provide the exact error code and model number when booking a service.

Why has Mitsubishi Electric Wi-Fi Control stopped working?

Check that the internet connection and router are working, the air conditioner has power and the Wi-Fi Control app is logged in. Re-pairing may be required after a router replacement, network name change, password change or network reset. Use the Mitsubishi Electric instructions for the specific adaptor.

Why has my air conditioning electricity use increased?

Higher electricity use may result from longer operating hours, extreme weather, very high or low temperature settings, dirty filters, blocked airflow, open doors and windows, poor insulation or conditioning more rooms. Arrange a maintenance check if electricity use rises significantly without a corresponding change in weather or usage and performance has also declined.

How often should I clean the filters and have the system serviced?

Follow the maintenance schedule in the manufacturer manual. For many wall-mounted Mitsubishi Electric systems, filters should be checked and cleaned approximately every two weeks during heavy use. A yearly professional service is a practical starting point for many residential systems, while commercial or heavily used systems may need more frequent servicing.

When should I stop troubleshooting and call a technician?

Stop using the system and arrange professional assistance for repeated circuit-breaker or safety-switch trips, smoke, sparks, persistent burning smells, electric shock or tingling, water near electrical parts, major indoor leakage, loud grinding noises, heavy ice that does not clear, recurring error codes or complete loss of heating or cooling after basic checks.

Careers at Climatic Air Conditioning

Build Your Career With a Local Geelong Team

Climatic Air Conditioning is a Geelong-based heating and cooling business working across residential and commercial air conditioning, servicing, repairs, maintenance, and heat pump hot water.

For more than 25 years, we've focused on practical advice, professional workmanship, and long-term customer relationships.

Behind that service is a team that takes pride in their work, communicates well with customers, and supports each other to get the job done properly.

What It’s Like to Work at Climatic

We believe good service starts with good people. Our team works across residential and commercial projects throughout Geelong, with a strong focus on quality, teamwork and continuous learning.

Teamwork & Communication

Good outcomes come from clear communication, reliability, and supporting each other.

Learning & Development

Our team keeps learning through manufacturer training, technical development, and hands-on experience.

Quality Workmanship

We take pride in doing the job properly, safely, and professionally.

Customer Focus

We value people who listen, communicate clearly, and care about delivering a good experience for every customer.

Future Career Opportunities

Qualified Technicians

Technicians who enjoy diagnosing problems, carrying out preventative maintenance and helping customers get the best performance from their systems.

HVAC Installers

Tradespeople with strong installation experience, attention to detail, and a focus on completing work safely and professionally.

Apprentices

From time to time, opportunities may become available for people who are looking to build a long-term career in heating, cooling, and refrigeration.

Customer Service & Support

As Climatic continues to grow, opportunities may also arise in customer service, scheduling, administration, and business support.

What We Value

Qualifications and technical ability matter, but so does attitude.

We value people who:

take pride in their work
communicate respectfully with customers and colleagues
arrive when they say they will
work well as part of a team
are willing to keep learning
care about safety and quality
look for practical solutions rather than shortcuts

The easy way to start

1.

Register

2.

Choose categories

3.

Choose location

4.

Enjoy!

What People Say About Us

“Great product. We love working with it!”

MashIt
“Amazing service. Can’t wait to find out what’s next!”

FabuFit
“Not sure what I did before discovering this Product. It’s super!”

YesSuits

Careers at Climatic Air Conditioning

Build Your Career With a Local Geelong Team